Operation Cautions of Artificial Sand Making Machine

Artificial sand making machine pays a key role in the sand production line. So whether can the artificial sand making machine run normally or not have an important influence on the whole sand making line. To ensure the efficient operation of the artificial sand making machine, operators must know the following operation note of the artificial sand making machine.

1. Ensure there is no bits of iron and steel mixing in raw materials. For personnel safety, people except operators must keep away from the artificial sand making machine.

2. Lubricating grease must be added in when artificial sand making machine has run for 400 hours. Spindle should be clean after the equipment has worked for 2000 hours, and bearing should be replaced ny a new one when it has run for 7,200 hours.

3. The rotating direction of the impeller cannot be turned back. If it is back, then the artificial sand making machine may go wrong.

4. Artificial sand making machine should not vibrate or make abnormal noise, or it must be stopped to check.

5. The tension of the v-belt must be sized properly to ensure same length of every group. The current difference of the two motors can not beyond 15A.

6. During the operation, personal safety should be paid special attention to. If the artificial sand making machine needs be repaired, it must be powered off and then be carried out the repairment.